Varla Pegasus P-Setting Instructions

We have received many inquiries from Varla scooter riders about how to set the speed unit (kph/mph), how to adjust the display brightness, how to reset mileage or the like.

If you have the same question, you’re in the right place!

There are three buttons on the handlebar: Up, Down, and M buttons. How can the user complete a P-Setting with the 3 buttons without messing up? Read on and learn more!

ACCESSING SETTINGS

1. Power on your scooter.

2. Hold the UP and DOWN buttons (3 seconds) to access the P-setting menu.

3. Press the M button to toggle through P-settings, until you see P08.

4. Press the DOWN or UP button to adjust the value. Press the DOWN button to 100.

5. After adjustment, short press the M button to switch to the next feature and save the previous feature value.

6. To save settings, allow the LCD display to timeout (8 seconds) or long press the UP and DOWN buttons to exit the menu.

For example:

Q1: How to adjust the backlight brightness?

1. Power on your scooter.

2. Hold the UP and DOWN buttons (3 seconds) to access the P-setting menu.

3. The first is P01, you can adjust the backlight brightness.

4. Press the DOWN or UP button to adjust the value and the backlight brightness. 

5. After adjustment, short press the M button to switch to the next feature and save the previous feature value.

6. To save settings, allow the LCD display to timeout (8 seconds) or long press the UP and DOWN buttons to exit the menu.

Q2: How to set the speed unit (kph/mph)?

1. Power on your scooter.

2. Hold the UP and DOWN buttons (3 seconds) to access the P-setting menu.

3. Press the M button to toggle through P-settings, until you see P02.

4. Press the DOWN or UP button to adjust the value. 1 means MPH, 0 means KPH.

5. After adjustment, short press the M button to switch to the next feature and save the previous feature value.

6. To save settings, allow the LCD display to timeout (8 seconds) or long press the UP and DOWN buttons to exit the menu.

Q3: How to unlock the speed?

1. Power on your scooter.

2. Hold the UP and DOWN buttons (3 seconds) to access the P-setting menu.

3. Press the M button to toggle through P-settings, until you see P08.

4. Press the DOWN or UP button to adjust the value. Press the DOWN button to adjust the value to 100.

5. After adjustment, short press the M button to switch to the next feature and save the previous feature value.

6. To save settings, allow the LCD display to timeout (8 seconds) or long press the UP and DOWN buttons to exit the menu.

varla commuter scooter


Leave a Reply

Your email address will not be published. Required fields are marked *

Analytics by Conversios